Reset
Filter By:
Anodize

MR50

Parts for Elsinore MR50 | MR50K0 | MR50K1

Show:
Sort By:
Re-MX logo short sleeve T-shirt in men's sizes using high quality 6.1oz cotton pre-shrunk mat..
$20.00
TT Fully Adjustable Show Stand Black New
TT fully adjustable show stand is made in USA of 3/4 inch square tube steel and 9/16 in threaded r..
$120.00
TT Fully Adjustable Show Stand Blue New
TT fully adjustable show stand is made in USA of 3/4 inch square tube steel and 9/16 in threaded r..
$120.00
TT Fully Adjustable Show Stand Green New
TT fully adjustable show stand is made in USA of 3/4 inch square tube steel and 9/16 in threaded r..
$120.00
TT Fully Adjustable Show Stand Red New
TT fully adjustable show stand is made in USA of 3/4 inch square tube steel and 9/16 in threaded r..
$120.00
TT Fully Adjustable Show Stand Yellow New
TT fully adjustable show stand is made in USA of 3/4 inch square tube steel and 9/16 in threaded r..
$120.00
Genuine replacement cylinder base gasketPart # = 12191-131-306Fits models:1974-1975 MR50..
$7.50
Honda gasket has been discontinued for a long time. This is a machine made genuine replacement for t..
$12.00
This is a genuine replacement, machine made, gasket for the clutch cover of the Honda MR50. It comes..
$9.00
Complete Gasket set to rebuild the engine of a Honda Elsinore MR50. This set comes as shown PLUS we ..
$47.95
Genuine replacement head gasket for MR50.Repolaces Honda part number 12251-131-003.Fits mode..
$15.00
Genuine replacement top end gasket set to rebuild the engine of a Honda Elsinore MR50. Perfect ..
$28.95
Genuine replacement MR50 exhaust gasket. Made in the USA to replace the discontinued Honda exhaust g..
$7.00
Genuine replacement oil seals needed when you are restoring a complete MR50 engine of your Honda Els..
$16.00
Thick 6mm washer (not copper) that compresses when you torque the head bolts on the engine.Part ..
$2.00
MR50 Replica DG Head -5%
THEY'RE BACK! Bringing back the bling. Available natural or anodized gold.Replica DG head for Ho..
$475.00 $450.00
Replacement circlips for the RE-MX piston kits sold between 2006 and 2014. You can identify one of o..
$7.50
Replacement piston pin for the RE-MX piston kits sold between 2006 and 2014. You can identify one of..
$18.00
Replacement piston rings for the RE-MX piston kits sold after 2006. You can identify one of our pist..
$40.00
In our MR50 master engine kit you get everything you need to rebuild the engine. All the engine shaf..
$165.00
Genuine replacement forged piston kit to rebuild the engine of a Honda Elsinore MR50. This set comes..
$124.00
Genuine Honda 10mm piston pinPart number 13111-GS7-000 Part Description PIN, PISTON (replaces 13..
$9.00
Dowel pin, siz 10 x 14mm,  found in the engines of many Honda modelsFits models:ATC110-..
$2.25
Dowel pin found in the engines of many Honda modelsFits models: 1969-1994 CT70 | CT70H 1970-19..
$2.75
Dowel pin found in the engines of almost every Honda model ever made.Fits models:1973-1978 X..
$2.00
Genuine replacement radial engine bearing kit for Honda Elsinore MR50. All bearings are greased and ..
$39.95
Honda MR50 NTN Crank bearing kit replaces the outer bearings. Radial deep groove ball bearings. Sold..
$23.95
Re-MX, Inc machine shop charge per 20 minute ..
$25.00
Re-MX, Inc will bore and hone your cylinder. While it is with us we will also blast the crud off and..
$95.00
Based on 3 reviews.
OEM Honda MR50 psiton pin bearing replaces the original caged roller bearing. This item is included ..
$11.00
Woodruff Key , flywheel - 3mm, almost all small (under 100cc) bikes from the 1970's used this size k..
$4.25
Genuine Honda 12mm (17mm WAF) bolt, oil drain plug.Fits models:SL70 | XL70 CT70 CT90 ST90..
$4.50
Genuine Honda 12mm oil drain crush washer. Shown with drain bolt (not included)Fits models:S..
$1.10
Carburetor screw set replaces the pan head screws found on the Honda MR50 carburetor. One screw..
$2.00
Replacement carburetor gasket set with bowl gasket and O-rings and the all important small disc..
$22.75
Genuine replacement carburetor repair part holds the press-in main jet in the carburetor body. Small..
$1.50
1974-1975 Honda MR50 Replacement Main Jet Out of Stock
Genuine replacement main jet for Elsinore MR50 comes with new O-ring as shown. Also available in hig..
$30.00
Genuine replacement Honda MR50 float needle. Use this if you find that the carburetor float valve is..
$7.00
Genuine replacement GoldWing GL1000 and Elsinore MR50 viton tipped float needle and seat. Use t..
$18.95
Air filter element to fit the stock air box on Honda MR50. Pre-oiled and cut to fit Elsinore MR50&nb..
$6.50
Genuine replacement for stock MR50 garter spring that holds air inlet tube to air box. Made in USA o..
$3.00
Genuine replacement for stock MR50 air intake boot from air box to stock carburetor. Made to fit the..
$25.00
Genuine replacement for stock MR50 air inlet tube. Made to fit the exactly like the origin..
$22.95
Genuine replacement for stock MR50 air filter retainer for stock air box. Choose plate A (no p/n) or..
$11.00
Air box pan head screw set replaces all the screws and washers needed to secure the Honda MR50 air b..
$3.00
E85 compatible fuel filter fits 4.5 to 5.5mm fuel line. 90 degree design allows for better fitment i..
$7.49
E85 compatible fuel filter fits 4.5 to 5.5mm fuel line. Discounts for 4 or more. Also comes in 90 de..
$4.00
Genuine Honda clip for fuel hose, vent hose, etc. Fits 3.5mm hose. ..
$1.09
Genuine Honda clip for fuel hose, vent hose, etc. Fits 4.5mm hose.  ..
$1.09
Genuine Honda wire clip for fuel hose, vent hose, etc. Fits 5.0mm hose. ..
$1.00
Fiber Washer found on exhaust systems on many Honda models. Generally used between the heat shield a..
$1.50
Genuine replacement rectifier rubber to secure your selenium rectifier to the frame of your bike. Ma..
$19.00
Genuine replacement rubber grommets for pin style frame mount on MR50, QA50 and Z50A. Compare these ..
$8.50
Genuine Honda rubber grommets SOLD EACH - Add Qty 2 to cart for a pair for pin style frame moun..
$5.50
OEM Honda gas cap gasket fits petrol caps on many early model Hondas. New caps come with t..
$3.50
Aftermarket fuel petcock fits petrol tank on many early model Hondas. Petock comes complete wit..
$13.00
OEM Honda fuel petcock fits petrol tank on many early model Hondas. Petock comes complete with ..
$29.95
OEM Honda dust cap, throttle cable to carburetor cap.Part # 16118-166-004Fits Hundreds of Ho..
$7.25
OEM Honda fuel petcock 16mm packing fits petrol valve on many early model Hondas. Find your model nu..
$5.00
Header guard screw set includes all the screws, washers and gaskets used to secure the front heat sh..
$6.50
Chrome guard screw set includes all the screws and fiber gaskets used to secure the heat shield to t..
$7.00
Back by popular demand and available only in limited numbers. This style replica DG chamber mounts t..
$399.00
Based on 1 reviews.
Genuine replacement chrome heat shield for your favorite 2-stroke mini. Patterned after the original..
$175.00
Genuine replacement MR50 rubber chain guide fits in the aluminum sprocket cover and keeps the chain ..
$13.50
Genuine replacement MR50 rubber damper fits in the aluminum sprocket cover as a cushion. This part i..
$4.00
Honda MR50 Counter Sprocket Cover Out of Stock
Genuine replacement MR50 die cast counter sprocket cover fits the left side engine case. Covers the ..
$75.00
Honda MR50 Counter Sprocket Cover Kit Out of Stock
Genuine replacement MR50 die cast counter sprocket cover fits the left side engine case. Covers the ..
$95.00
OEM Honda stud 6 x 18  used on many bikes and many applications. Sold eachPart Description ..
$1.50
The Honda MR50 plastic front fender in 1974 model color Daytona Orange or 1975 model color Tahitian ..
$54.95
The Honda Elsinore MR50 plastic body kit comes complete with all three pieces. In 1974 model color D..
$165.00
The Honda MR50 plastic rear fender in 1974 model color Daytona Orange or 1975 model color Tahitian R..
$74.95
The Honda MR50 plastic body kit comes complete with all three pieces. In 1974 model color Daytona Or..
$165.00
The Honda MR50 plastic body kit comes complete with all three pieces. In 1975 model color Tahitian R..
$165.00
Complete plastic fender and side number plate kit for the Elsinore MR50. Make your mini elsinore hav..
$165.00
Complete fender and side number plate kit for the Elsinore MR50. Make your mini elsinore look just l..
$165.00
The Honda MR50 plastic left side cover, number plate in gloss black for a special look. Can be paint..
$44.95
The Honda MR50 plastic left side cover, number plate in 1974 model color Daytona Orange or 1975 mode..
$44.95
Genuine replacement front brake cable guide that mounts on the number plate of many Honda dirt bikes..
$5.00
Genuine replacement stainless steel stay to secure number plate to the front forks. Discount availab..
$12.00
Front Plate kit complete with bracket, cable guide and correct replica band. This is a combination o..
$42.50
Genuine replacement strap to secure number plate bracket to the front forks. Discount available when..
$10.00
Genuine replacement stay and hardware kit to secure number plate to the front forks. Front number pl..
$20.00
Genuine replacement oval number plates fit front bracket for MR50 and XR75 and are correct replaceme..
$19.00
Genuine replacement oval number plates fit front bracket for MR50 and XR75 and early XR80. These are..
$19.00
Based on 2 reviews.
Genuine replacement oval number plates fit front bracket for MR50 and XR75 and are correct replaceme..
$19.00
Based on 2 reviews.
Genuine replacement oval number plates fit front bracket for MR50 and XR75 and are correct replaceme..
$19.00
Based on 1 reviews.
Genuine Honda rubber grommet fits many Honda models (see below). Mostly used as vibration grommet on..
$3.75
Genuine Honda rubber grommet fits many Honda models. Mostly used as vibration grommet on plasti..
$4.00
Genuine replacement rubber grommet fits many Honda models. Mostly used as vibration grommet on ..
$2.25
Genuine Honda fork oil seal 25 x 35 x 9. Sold individually. You must add two (2) to the cart to rece..
$11.00
Genuine replacement Japanese made, double lip fork oil seal 25 x 35 x 9. Use when rebuilding the fro..
$9.95
Our own remake of the Elsinore MR50 front fork dust cover. Necessary when your original covers are c..
$11.00
Ball bearing #6 (3/16 in) steel. In most applications for Honda dirt bikes requires 42 pieces. Minim..
$0.15
Thick 6mm copper washer that  seals the cylinder studs on many Honda models including all model..
$3.00
Thick 6mm copper washer that  seals the drain bolt on fork lowers on nearly 1000 Honda models i..
$2.00
OEM Honda Elsinore MR50 front fork dust cover. Necessary when your original covers are cracked or mi..
$18.50
OEM Honda 13mm bright chrome washer for top fork bolt.Part number 94606-13001Fits model..
$1.25
SOLD EACH - an order of 1 will only get 1. OEM Honda chrome top fork bolt with O-ring oil seal...
$7.00
Genuine Honda washer, steering stem is a very thin dust seal/washer used in the steering stem assemb..
$3.00
OEM Honda washer sits under chrome nut, steering stem on the top fork bridge. See table below for fi..
$2.50
Genuine Honda rubber washer, steering stem is a very thin dust seal/washer used on the following mod..
$3.00
Genuine Honda inner bearing race for bottom of head tube.Fits models:ATC110-A 1980 110 ..
$9.00
Genuine Honda inner bearing race for top of head tube.Replaces 50302-030-305, 50301-918-000..
$9.00
Genuine Honda bearing race for top or bottom of head tube.Replaces 50302-030-305, 50301-918-000,..
$10.00
OEM Honda chrome cap nut, steering stem. Buy this one and drill your own breather hole!Part numb..
$6.00
Genuin Honda push button kill switchReplaces 35130-444-000, 35130-169-000, 35130-467-000, 35130-..
$33.95
Universal push button kill switch for Honda dirt bikes that use two wires (green and black). Comes w..
$12.00
1974-1975 MR50 Throttle Tube Out of Stock
Genuine replacement throttle tube. Fits 3/4 inch stock handlebars and the stock Honda throttle housi..
$27.95
Aluminum cable tie with black plastic casing to secure wires to frame of many early model Honda..
$2.00
Genuine replacement Honda MR50 brake cable fis stock forks and handlebars. If you need a new brake c..
$25.00
Honda MR50 Cable Set - Throttle Clutch Brake Out of Stock
Genuine replacement Honda MR50 cable set. If you need all new cables for your Elsinore MR50 then buy..
$75.00
Genuine replacement Honda MR50 clutch cable fits stock frame and handlebars. If you need a new clutc..
$25.00
Honda MR50 Throttle Cable Out of Stock
Genuine replacement Honda MR50 throttle cable fits stock carb and throttle assembly only. If you nee..
$27.95
Small levers that fit the early year minitrails and other bikes that used two levers for clutch and ..
$18.95
Small brake lever that fit the early year minitrails and other bikes that used two levers for front ..
$9.95
Genuine replacement front brake cable clip. Looks like a chrome pigtail and acts as a cable guide wh..
$15.00
Aftermarket spark plug cap designed to replace the original Honda cap. All black design with almost ..
$5.75
Genuine NGK B6HS spark plug. Buy one or buy a box of 4 and save money. We carry them for the MR50 bu..
$5.00
NGK BP6HS Spark Plug Out of Stock
Genuine NGK BP6HS spark plug. Buy one or buy a box of 4 and save money. We carry them for the PA50 b..
$2.95
NGK spark plug cap replaces the original Honda cap. Design shows NGK in white against the black..
$4.00
OEM Honda spark plug cap. All black design with almost no additional marking. Correct, just very dea..
$14.95
Replacement 6 volt coil with 8" spark wire and 8" wire with male bullet connector as terminator. Coi..
$59.95
Electronic Ignition - CDI unit. End the hassle of points and condensor tuning in small Honda bikes. ..
$50.00
Genuine NOS Honda contact points in original packaging. Limited to stock on handPart # = 30202-0..
$20.00
honda-part-11431-063-000 <--- SEO Genuine replacement Honda points cover. If yours i..
$29.95
NOS Honda chain guard. Original finish.Part # = 40510-131-000 Part Description = CASE, DRIVE CHA..
$100.00
Honda swing arm bushing with 10mm ID. These rubber and steel sleeves will need to be pressed out whe..
$8.50
OEM Honda left or right foot peg springs sold individually. Make choice from options shown or add bo..
$3.95
Pin step bar fits hundreds of Honda models.Part number 50603-033-000Fits models:C70-A 19..
$3.75
OEM Honda bushing shock eye. Steel sleeve used in top or bottom eye with rubber bushing.Part num..
$3.25
OEM Honda bushing shock eye. Some models used as both top and bottom. Others, bottom only. 10mm ID. ..
$3.75
OEM Honda bushing shock eye. Some models used as both top and bottom. Others, bottom only. 12mm ID. ..
$3.00
Aftermarket black folding shift lever with new toe rubber. Will fit many models.1970-1979 CT70 ..
$18.95
OEM Honda Shift Lever Rubber; toe rubber. Lever not includedPart number 95011-40000Fits hund..
$2.00
Genuine replacement chrome gear shift lever for many Honda models. This lever has the correct spline..
$26.95
Genuine Honda Kick Start Lever rubber slides over folding kick levers of many original small Ho..
$3.25
Genuine Honda Kickstand rubber A. Eliminates the sidestand from hitting the muffler. Acts as a stop ..
$1.50
Genuine Honda side stand, kick stand spring.Part number 95014-72102Fits models: 1980-1981 C..
$4.00
Use this stencil to apply vinyl paint to your existing seat cover or if you bought an MR50 seat cove..
$6.00
New MR50 seat cover - made in the USA of rough grain material with "HONDA" logo in correct size/colo..
$50.00
Based on 1 reviews.
Genuine replacement MR50 seat foam. Made in the USA from our very own mold. Dense foam so your ..
$59.95
Self adhesive vinyl cording protects new vinyl seat cover installations from sharp steel seat pan. F..
$2.00
1974 MR50 K0 Complete Decal Set Within 30 Days
Complete decal set for 1974 MR50. All images shown come in this set. All decals are available separa..
$59.00
1975 MR50 K1 Decal Set Within 30 Days
Complete decal set for 1975 MR50. All images shown come in this set. All decals are available separa..
$69.00
1974 MR50 K0 Tank Wing Decal Set In Stock
Genuine replacement tank wing decal set for 1974 MR50. Also available in our complete decal set for ..
$16.00
1975 MR50 K1 Tank Wing Decal Set 7-14 days
Genuine replacement tank wing decal set for 1975 MR50. Also available in our complete decal set for ..
$14.00
Decal printed on foil showing country of origin. This decal is found on the head tube of the frame o..
$3.75
1974 MR50 Side Cover White Oval Decal Out of Stock
1974 MR50 number plate oval decal found on the left side cover of the 1974 model. This decal is incl..
$10.00
1974-1975 MR50 Air Cleaner Cover Decal Out of Stock
Elsinore MR50 ID decal found on the air box cover of the 1974 model and only the earliest 1975 model..
$12.50
1974-1975 MR50 Oil Mixture Ratio Decal Out of Stock
Oil mixture warning decal found on the gas cap of the Honda Elsinore MR50. This decal is included in..
$6.00